When someone doesn’t know how to fix a plumbing problem it can seem difficult and daunting to even think about it. Professional plumbers can be costly and you can end up waiting forever for repairs that you can do yourself, if you know how. Continue reading to learn some tips which should make your plumbing projects easy to tackle in the future.
Don’t let your house temperature drop to below freezing and make sure to insulate anything that is exposed to the outside elements to prevent frozen pipes. If ambient temperature surrounding pipes goes below freezing, pipes can freeze as well. If pipes do freeze, the best possible scenario would include taking time for the pipes to thaw and any frozen water to drain. The worst case scenario is a busted pipe and a costly repair.
If a pipe freezes, make sure you turn the closest faucet to allow the thawing water to exit. By doing this, the pipe pressure is relieved, and this should stop it from bursting, which would prevent further home damage.
Wait until a job is done before you pay for it. You may have to put money down before they start working, but avoid paying the total amount until it’s done. You will feel better paying the bill when you are completely satisfied with the job.
If you want to look for floor damage around your toilet, just check the flooring for softness. Another great way to check is to actually sit on the toilet and move in a rocking motion, going back and forth from right to left to see how much give you feel. Identify any damage and repair it before it gets worse. In the long run, you are likely to save money by not putting off the repair.
Place a strainer over the drains to collect anything that could clog and cause stoppage. The strainer used in the kitchen will need to be cleaned frequently. The bathtub strainer will prevent hair from clogging up your drain.
Save money by getting better shower heads. Most of the hot water used in the home is used while showering. Install energy saving faucets throughout your home and you can recapture your cost within the year.
Always buy a high quality fixture if you are going to replace your shower head. Choosing the cheapest shower head in the store can end up costing you more in the long run. The problem about this is they aren’t sturdy and they tend to break a lot easier.
Fix low water pressure by cleaning out the aerator to clean out sediment buildup. To clean the aerator, you first want to disassemble the faucet and remove it. After that, remove the aerator and scrub it clean with a fine brush. You can use vinegar or some other type of cleaning solution to assist in the task. Rinse the aerator, reassemble it and reattach it to the faucet. If the problem was caused by a dirty aerator, cleaning it will increase the pressure.
As you can see, plumbing problems don’t have to be so difficult. If you can solve the problem yourself, you can save time waiting for a plumber, as well as saving a whole lot of money. Try applying what you’ve learned from this article next time you have a plumbing problem!